 
|
Industrial Boiler Softening System Advanced Control for Stable Water Supply
Product Details:
| Place of Origin: | Henan, China |
| Brand Name: | TAIGUO |
| Certification: | CE、EAC、SGS |
| Model Number: | YF-02 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 |
|---|---|
| Price: | USD $790.00-7000.00 |
| Packaging Details: | Bulk, packaged |
| Delivery Time: | 10-30 working days |
| Payment Terms: | L/C, T/T, Western Union |
| Supply Ability: | 100set |
|
Detail Information |
|||
| Product Name: | Water Treatment | Treated Water Volume T/H: | 0.5T—65T |
|---|---|---|---|
| Raw Water Hardness: | ≤6mmol/L | Hardness Of Water Production: | ≤0.03mmol/L |
| Control Mode: | Time/flow | ||
Product Description
Product Introduction:
Boiler softening water equipment plays an important role as a good helper of the boiler. Boiler is one of the common devices in industrial production, but when the boiler water contains super-hard salt substances, such as calcium and magnesium ions, it will produce scale on the boiler, thereby reducing the thermal efficiency of the boiler, increasing fuel consumption, and even may cause local overheating and damage components, causing explosion. Therefore, industrial boilers should carry out water softening treatment, generally using cation exchange resin (water softener), the water ca2+, mg2+ (the main component of the formation of scale) replacement, with the increase of ca2+, mg2+ in the resin, the efficiency of the removal of ca2+, mg2+ gradually decreased. When the resin absorbs a certain amount of calcium and magnesium ions, it must be regenerated, and the regeneration process is to wash the resin layer with salt water in the salt box, and replace the hardness ions on the resin, and then discharge the recycled waste liquid outside the tank, and the resin recovers the softening exchange function. Boiler softening water equipment is operated in a similar manner.
Product characteristics:
1, high degree of automation, stable water supply conditions.
2, advanced program control device, accurate and reliable operation, instead of manual operation, fully realize the automatic conversion of all aspects of water treatment.
3, High efficiency and low energy consumption, economic operating costs. As the overall design of the water softener is reasonable, the exchange capacity of the resin can be fully brought into play, and the equipment uses jet flow salt absorption instead of salt pump to reduce energy consumption.
4, the equipment structure is compact, covers a small area, saves infrastructure investment, installation, commissioning, easy to use, operation.
Softened water equipment installation needs careful attention:
1, do not need to do installation foundation, foundation level can; There is a certain gap from the wall, and it can be arranged near the corner according to the actual situation.
2, the inlet and outlet pipes are standard flanges or threaded connections, which need to be fixed and supported, and cannot be supported by the valve body to prevent stress.
3. Water pressure gauge should be installed on the water inlet pipe. When the equipment is running, the flushing water is discharged, and the floor drain or drainage ditch should be set nearby; The blowdown pipe should not be longer than 6 meters, do not install a stop valve, the outlet should not be higher than the valve body, the terminal opening [to avoid siphoning], the fewer elbows the better.
4. If the inlet water pressure is lower than 0.2mpa, a pipeline pump must be installed.
5, the pipe must be flushed before use to avoid impurities clogging the valve body and polluting the resin.
6, brine pipe: the salt tank should be as close as possible to the softening tank, the shorter the brine pipe, the better.
7. Install a distribution socket on the wall near the equipment, which should be equipped with a fuse [generally do not install a switch], and require good grounding.
Technical parameter:
| model number | Treated water volume T/H |
Resin tank specification×quantity | Salt shaker x number | Equipment size (mm) |
| YF-0.5 | 0.5T/H | 200*1100×1 | 340*700×1 | 600*400*1200 |
| YF-1 | 1T/H | 250*1370×1 | 340*700×1 | 800*500*1500 |
| YF-2 | 2T/H | 300*1320×1 | 340*700×1 | 900*500*1500 |
| YF-3 | 3T/H | 350*1650×1 | 390*850×1 | 1000*500*1800 |
| YF-4 | 4T/H | 400*1650×1 | 500*1020×1 | 1100*700*1800 |
| YF-6 | 6T/H | 530*1750×1 | 500*1020×1 | 1300*900*2000 |
| YF-8 | 8T/H | 600*1850×1 | 580*1200×1 | 1600*1000*2100 |
| YF-10 | 10-12T/H | 750*1850×1 | 730*1310×1 | 2000*1200*2150 |
| YF-15 | 15T/H | 900*1850×1 | 875*1350×1 | 2300*1500*2400 |
| YF-20 | 18-22T/H | 1000*1850×1 | 980*1400×1 | 2500*2200*2400 |
| YF-35 | 25-35T/H | 1200*2400×1 | 1300*1310×1 | 3000*2700*3000 |
| YF-50 | 50T/H | 1500*2400×1 | 1300*1310×1 | 4000*2700*3000 |
FAQ:
Q1: How can you get the best price quickly?
1.We need to know the boiler capacity, the fuel you plan to use and the steam pressure you need, and then we can confirm the boiler model.
2. Customer needs to provide us your name, email address and company name, and then we will send you price list immediately.And if you use whatsapp, skype or wechat, you can provide us your ID, it will be more convenient for our communication.
Q2:Why choose us?
1.40+ years of boiler manufacturing experience, 10 years of export experience.A grade boiler factory.
2.Free replacement of parts for one year, lifetime maintenance of the main engine, except for improper operation.
Q3: Details of electric control cabinet
Electric control cabinet adopts PLC touch screen, display in English. It shows working condition details of boiler, such as water temperature, water pressure, exhaust gas temperature, and over-pressure alarm, etc. In addition, the cabinet is used for set up the parameter, record and analyze the operation data, etc.
Q4:What is the using life of your boiler?
1.Normally the boiler is designed for 20 years life span, but with right operation and good maintenance,the boiler can be used for 20-25 years.