 
|
Mechanized Feed 10t/H Steam Boiler Biomass Combustion Stabilized
Product Details:
| Place of Origin: | Henan, China |
| Brand Name: | TAIGUO |
| Certification: | CE、EAC、SGS |
| Model Number: | DZL |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 |
|---|---|
| Price: | US $10000.00 |
| Packaging Details: | Bulk, packaged |
| Delivery Time: | 30 working days |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 100set |
|
Detail Information |
|||
| Product Type: | Biomass Steam Boiler | Fuel: | Biomass Particles, Wood Chips, Coal, Palm Shells, Etc |
|---|---|---|---|
| Steam Yield: | 1t/h-10t/h | Working Pressure: | 1.0、1.25、1.6Mpa |
| Structural Form: | Horizontal | ||
| Highlight: | 10t/h steam boiler biomass,mechanized feed steam boiler biomass,mechanized feed biomass fired steam boiler |
||
Product Description
Product introduction:
The new DZL series steam boiler is a single cylinder-type longitudinal water-fire tube shell boiler, and the combustion equipment is a chain grate. The water cooling wall on the left and right sides of the furnace is a radiant heating surface, the convection heating surface in the upper two wings of the furnace is a convection heating surface, and the threaded smoke pipe (with a diameter of 57×3) is arranged in the boiler drum. The furnace wall adopts a new process of heat-resistant concrete cast and rammed as a whole, and the outer side of the boiler main engine is a three-dimensional protective plate shell. This series of boilers use the latest scientific research results, such as: arch tube plate, threaded smoke pipe, secondary air and other new technologies, better solve the shell boiler tube plate cracks, low thermal efficiency, insufficient output, poor fuel adaptability and other problems.
Product characteristics:
(1) The cylinder is composed of arch tube plate and threaded smoke pipe, so that the cylinder is changed from a quasi-steel body to a quasi-elastic structure, and the pulling member in the tube plate area is cancelled and the stress is reduced. The smoke pipe in the tube plate is changed from two return trips to one return trips, which solves the problem of tube plate cracks.
(2) Due to the arrangement of the rising pipe row in the lower part of the drum, the dead water area at the bottom of the drum is eliminated, so that the mud is not easy to deposit, and the lower part of the drum has a refractory layer, so that the high temperature area of the drum is not directly affected by the flame radiation heat, and the lower part of the boiler shell is prevented from bulging.
Technical parameter:
|
item |
DZL1 |
DZL2 |
DZL3 |
DZL4 |
DZL6 |
DZL8 |
DZL10 |
DZL12 |
DZL15 |
||
|
Rated evaporation capacity(t/h) |
1 | 2 | 3 | 4 | 6 | 8 | 10 | 12 | 15 | ||
| Rated pressure(Mpa ) |
0 .7/ 1 .0/ 1 .25 |
0 .7/ 1 .0/ 1 .25 |
0 .7/ 1 .0/ 1 .25 |
1 .25/ 1 .6 | 1 .25/ 1 .6 | 1 .25/ 1 .6 | 1 .25/ 1 .6 | 1 .25/ 1 .6 | 1 .25/ 1 .6 | ||
| Rated steam temperat ure( ℃ ) |
170/ 184/ 194 |
170/ 184/ 194 |
170/ 184 / 194 |
194/204 | 194/204 | 194/204 | 190/204 | 194/204 | 194/204 | ||
| Feed water temperat ure( ℃ ) | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | ||
| Heating Area( m) | Body | ~33 | ~50 | ~75 | ~100 | ~170 | ~200 | ~250 | ~340 | ~415 | |
| Economizer | 20 .7 | 25 .3 | 28 .6 | 33 . 12 | 87 .2 | 98 | 145 | 168 | 189 | ||
| Effective area of garte ( m) | 2 .22 | 4 . 1 | 5 .85 | 6.2 | 7 .95 | 9 .75 | 10 .77 | 13 .4 | 16 .6 | ||
| Fuel type | Biomass pellet,wood sawdust,bamboo chip,wood block,straw ,Jute, palm shell | ||||||||||
|
Fuel Consumption (kg/h) |
~200 | ~400 | ~600 | ~800 | ~1000 | ~1200 | ~1400 | ~1600 | ~1800 | ||
| Flue gas temperat ure( ℃ ) | ~150 | ~150 | ~150 | ~150 | ~150 | ~150 | ~150 | ~150 | ~150 | ||
| T hemal efficiency(%) | ~82 | ~82 | ~82 | ~82 | ~82 | ~82 | ~82 | ~82 | ~82 | ||
|
Weight of biggest part for t ransportation(t) |
17 | 18 .5 | 20 | 25 | 35 | 45 | 58 | 64 | 77 | ||
| Overall dimension of biggest part for t ransportation( m) |
5 . 1*2 .2 *3 |
5 .5*2 .3 *3 .3 |
6 .4*2 . 4*3 .5 |
6 .6*2 .6 *3 .6 |
8 . 1*2 .9 *3 .8 |
8 .3*3 . 1 *4 .0 |
8 .6*3 .2 *4 .2 |
9 .8*4 .2 *4 .5 |
12 .9*4 *7 .5 |
||
Work flow chart:
After-sales service:
1: Service system
Our service tenet is "to provide customers with sincere, quality service". We are committed to honesty and good service to our customers and are committed to continuously improving the quality of service and increasing user satisfaction.
1.1: Pre-sale service
(1) Patiently introduce the product and quality to the user in detail.
(2) Provide technical advice to users, including the use and maintenance of products, products
Assembly, use characteristics and other technical problems, where the user needs to provide services,
The company will send the best engineering and technical personnel for customer service and technical consultation.
1.2: In-sale service
(1) Users who have the intention to order are recorded in the user service tracking dynamic table.
(2) Where the development of new users, within one week after the arrival of the goods to the user, the Marketing Department will contact the customer by phone or go to the user site to understand the acceptance of the goods, whether the product quality can meet customer needs, and other needs of customers.
(3) Where we need to guide the installation, ensure that the goods arrive, introduce the product to the user in a timely manner, and assist the user to install, introduce the installation, use methods and technical requirements.
(4) Key users should send people to visit the service once or twice a year to solicit opinions and solve the problems raised by users in a timely manner.
1.3: After-sales service
1. When users use our products for quality problems, they will reply within 1 hour when receiving customer service needs, and provide solutions within 24 hours.
2. Implement the "Product quality responsible person system". After the contract is signed, from product manufacturing, warehousing, delivery to installation, trial operation, the whole process of service, improve the quality of the project.
1.4: Standardized service standards
① Provide detailed and enthusiastic consulting services before and during sale
② On-site commissioning, demonstration guidance and use, to ensure the provision of perfect technical guidance, operational training
③ Establish an independent user file card for each customer and implement regular tracking services.